Universal Remote Control (URS) SL-8000 - Manual (Page 33)

No IR commands are emitted during the second press of a
Device button when the remote is in the Automatic Audio
mode. Pressing the
Device button again will return the
remote to the Main Device Mode.
To Delete the Automatic Audio for a Device mode:
1 Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2 Press the Device button corresponding to the Device mode
to be deleted for Automatic Audio. E.g. VCR, CD etc.
A_OFF
will appear in the LCD indicating the deleted
status of the automatic Audio mode for the Device mode.
3 Press the ENTER button to store the programming.
SAVE
will flash in the LCD and then return to AUDIO.
To Return to Automatic Audio for a Device mode:
1 Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2 Press the Device button corresponding to the Device mode
to be added for Automatic Audio. E.g. VCR, CD etc.
A_ON
will appear in the LCD indicating the active
status of the Automatic Audio mode for the Device mode.
3 Press ENTER to store the programming. SAVE will flash
in the LCD and then return to AUDIO.
Backlighting
All the buttons and the LCD on the SL-8000 are back-lit
for 7 seconds when the LIGHT button is pressed. The back-
light is extended an additional 7 seconds with any button
press while the backlight is on.
16 16
Using Y Using Y our Remote our Remote