Universal Remote Control (URS) Mobile for Android User Manual
Page 37
Page 32
URC M
OBILE
General
Always On: When ON the Android device never turns off, reducing battery
life. When turned OFF, the Android device follows its
time-out settings.
Factory Default: Press OK to reset the URC Mobile app.
Android Integration: Allow the URC Mobile app to open other installed
applications on this device, while still controlling your system. A green
Android robot populates the Categories/Devices ribbon when this feature is
enabled.
Refer to the Android App Integration section on page 13 for more details.
Android Integration Settings: This feature is available when Android
Integration is turned ON. Select Android Integration Settings to add, delete
and reorder applications.
Refer to the Android App Integration section on page 14 for more details.
Version #: Displays URC Mobile’s version number.
Offsite Control
THIS SECTION SHOULD ONLY BE CONFIGURED BY A URC
PROFESSIONAL INSTALLER AS INCORRECT CONFIGURATION MAY
RESULT IN THE SYSTEM NOT WORKING PROPERLY.
Controller:Select to view a separate screen detailing the URC system name,
system configuration status, host address, enable remote access and override
setup.
System Name: Displays the name of the currently connected MRX
System.
System Configuration: Visually shows whether the system is accessible for
offsite control by showing OK (access) or Disabled (turned OFF).
Remote Access: Allows communication to your URC system while
outside of the local network. Turn ON to enable, OFF to disable.
Override Setup: Allows you to override the host address of your URC
Control System. When this feature is off the Host Address is grayed out.
See below. This is an INSTALLER ONLY feature. Do not touch as it may
hinder your system configuration.
Host Address: Displays the Host address name. Turn ON Override Setup
to change the Host Address name. Use the on-screen keyboard to enter a
new host address.
Remember Password: Enable to require a password when the application
begins.
Locations
Multiple Locations: Multiple systems in different locations can be accessed
and controlled from the URC Mobile app when creating profiles.
Refer to the Multiple Locations section on page 16 for more details.