Universal Remote Control (URS) THZ-100 - Manual (Page 26)

Page 22
THZ-100 T
HERMOSTAT
Turning the Thermostat Off
If you desire to turn the HVAC system equipment off then use the arrow
keys to move the highlight bar to Climate Control Off.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this new mode. If you decide to cancel the
operation then press the key below the Cancel key label in the smart-key
label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main screen
without pressing the OK button, no change is made to the climate mode.
In the Climate Control Off mode, the thermostat does not activate the system
equipment to cool or heat your home.
Changing the Fan Modes
If you desire to change the system fan mode between on continuously,
periodic cycling, or automatically on when heating or cooling is on, use
the arrow keys to move the highlight bar to Fan Modes. The current state
of the fan displays in the right column.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this new mode. If you decide to cancel the
operation then press the key below the Go Back key label in the smart-
key label at the bottom left of the display.
Selecting Fan On Continuously
If you desire the system fan to operate continuously then use the arrow
keys to move the highlight bar to On.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this new mode. If you decide to cancel the
operation then press the key below the Cancel key label in the smart-key
label at the bottom left of the display.