Carrier Access Adit 3104 - Manual (Page 46)

4-6 Adit 3104 - Release 1.6
Configuration
Log in
Log in
After successful connection, via telnet or HyperTerm, the user must login. Default Logins are:
Login: admin
Password: admin123
After successful login the prompt will be displayed as follows:
Adit 3104>
Note: It is recommended that you change your password from the default. See the following to
modify the Admin level password on your system.
GUI interface - see Advanced/Users window
CLI interface - use the Adit 3000(config)#username command