Chauvet Range - Manual (Page 4)

COLORado Range IP QRG
Page 4 of 8
AC Power This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Mounting Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<SET>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Overhead Mounting
Floor Mounting
C Clamps
(not included)
Safety cable
(included)
COLORado Range IP QRG
Page 5 of 8
Menu Options
Main Level 2 nd Level 3 rd Level Description
STAT
RED
000~255
(0~100%)
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 (0~20 Hz) Select a strobe frequency
AUTO
AUTO
1~10
Choose from 10 automatic programs
CUSTOM Choose from 10 customizable programs
ADDR 001~512 N/A Sets the DMX starting address
RUN DMX/SLAV N/A Selects the DMX or SLAVE mode
PERS
TOUR
N/A
16-channel
ARC 1 3-channel
AR1.D 4-channel
ARC.3 5-channel
AR3.D 6-channel
AR3.S 7-channel
HSV 3-channel
BLOCK 10-channel
SET
UPLD PSWD SEND END Uploads custom programs
REST PSWD RST END Resets the fixture to the factory settings
DIM
OFF Faders act linearly
DIM1~4 DIM1 (fastest)~DIM4 (slowest)
COLOR
OFF No color compensation
RGBW White is defined by CAL2 > RGB.W
UC Color compensation to match older fixtures
EDIT
PR
(1~10) SC
(01~30)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate a custom color.
GREEN
BLUE
WHITE
AMBER
STRB 00~20 Selects the strobe frequency (0~20 Hz)
TIME
000~255
Defines the step duration (0~100%)
FADE Defines the fade duration (0~100%)
CAL1 WH (1~11)
RED
000~255
User can combine Red, Green, Blue, White,
and Amber to generate whites with various
temperatures (TOUR > Channel 12). GREEN
BLUE
WHITE
AMBER
CAL2 RGB.W
RED
000~255
User can combine Red, Green, and Blue to
generate a balanced white (SET > COLOR
>RGBW))
GREEN
BLUE
WDMX
ACTI
ON/OFF
Activates W-DMX connection
REST Resets W-DMX connection
KEY ON/OFF N/A Turns the password on or off