Welch Allyn Connex Central Station - User Manual - Manual (Page 63)

7. This area displays the EarlySense sensor data.
Note Alarm limits for the EarlySense sensor are set at the device. The alarm can only be dismissed at
the device. See the device directions for use.
• The EarlySense measurement displayed under the MOVEMENT tile will be one of the following:
○ 0 – No motion
○ L – Low
○ M – Medium
○ H – High
○ EH – Extremely high
• The Exit sensitivity graph indicates the bed exit sensitivity setting. This setting is controlled at the
device. See the device directions for use.
• The SOURCE: label indicates the EarlySense source.
• The timer next to the TURN: indicates the amount of time remaining before the patient's next scheduled turn.
Note If the patient turn reminder is active, the timer counts down to zero and then displays a reminder in
the System message area to perform and log a patient turn. If a scheduled patient turn remains
overdue, an alarm message appears in the System message area.
8. Click this button to open the Review window.
Directions for use EarlySense sensor 57