Welch Allyn Tycos Hook Cuff - User Manual User Manual
Tycos hook cuff, Instructions
Tycos Hook Cuff
Instructions
The Tycos Hook Cuff is made of lightweight, sturdy fabric with stainless steel ribs and
buttons for a snug fit. Welch Allyn provides a nylon strap on the larger cuffs for secure
attachment of the Tycos Pocket Aneroid Gauge.
How to Use the Cuff
1.
Hold the end of the cuff containing the inflation bag firmly against the inside of the
bare upper arm and position the artery symbol over the brachial artery.
2.
Pull the opposite end of the cuff snugly around the arm, and with the left thumb in the
position shown in Figure 2, hook metal “button-hole” A over metal button B.
If this does not quite reach, hook “button-hole” AA over button BB, which is the next larger
adjustment “5/8” larger)
Tycos Hook Cuff
Instructions
The Tycos Hook Cuff is made of lightweight, sturdy fabric with stainless steel ribs and
buttons for a snug fit. Welch Allyn provides a nylon strap on the larger cuffs for secure
attachment of the Tycos Pocket Aneroid Gauge.
How to Use the Cuff
1.
Hold the end of the cuff containing the inflation bag firmly against the inside of the
bare upper arm and position the artery symbol over the brachial artery.
2.
Pull the opposite end of the cuff snugly around the arm, and with the left thumb in the
position shown in Figure 2, hook metal “button-hole” A over metal button B.
If this does not quite reach, hook “button-hole” AA over button BB, which is the next larger
adjustment “5/8” larger)
Figure 1
Figure 2
Figure 1
Figure 2
Document Outline
- Tycos Hook Cuff
- Instructions
- How to Use the Cuff
- 1. Hold the end of the cuff containing the inflation bag firmly against the inside of the bare upper arm and position the artery symbol over the brachial artery.
- 2. Pull the opposite end of the cuff snugly around the arm, and with the left thumb in the position shown in Figure 2, hook metal “button-hole” A over metal button B.
- How to Use the Cuff
- Instructions
- Tycos Hook Cuff
- Instructions
- How to Use the Cuff
- 1. Hold the end of the cuff containing the inflation bag firmly against the inside of the bare upper arm and position the artery symbol over the brachial artery.
- 2. Pull the opposite end of the cuff snugly around the arm, and with the left thumb in the position shown in Figure 2, hook metal “button-hole” A over metal button B.
- 3. Completely deflate the armband to avoid difficulty in unhooking the cuff. To remove cuff from arm, press thumb against metal button BB as shown in Figure 2, and pull tail end of cuff toward thumb until “button-hole” disengages from button.
- 4. When using the cuff with the Tycos Pocket Aneroid, fold it in a manner to protect the gauge.
- Cuff and Bladder Warranty:
- 3. Completely deflate the armband to avoid difficulty in unhooking the cuff. To remove cuff from arm, press thumb against metal button BB as shown in Figure 2, and pull tail end of cuff toward thumb until “button-hole” disengages from button.
- 4. When using the cuff with the Tycos Pocket Aneroid, fold it in a manner to protect the gauge.
- Cuff and Bladder Warranty:
- How to Use the Cuff
- Instructions