Welch Allyn CardioPerfect Workstation 1.6.5 Software Self Installation - Quick Reference Guide - Manual (Page 7)

7
INSTALLING THE SPIROMETER ON
A CARDIOPERFECT WORKSTATION
1 Assemble the spirometer, and plug it into any USB port.
2 Verify the installation of the spirometer.
Caution With the spirometer, always use the USB
extension cable, as shown. This cable helps
to prevent damage to the spirometer.
Before you start, install the CardioPerfect Workstation software.
Attach the flow tube. Attach the calibration syringe as illustrated.
(a) Click Go.
(b) Select your test patient.
(c) Click Spirometry.
b
a
c
(next page)
Welch Allyn
CardioPerfect
The lot code and calibration code appear on the
flow transducer box: