Welch Allyn Connex Vital Signs Monitor Base Set - Quick Reference Guide User Manual
Welch allyn connex, Devices, Quick reference card
Welch Allyn Connex
®
Devices
Quick Reference Card
Power on/Display power-saving mode
• Located on the device housing
• Powers up the monitor
• Brief press – Sets monitor to Display power-saving mode
(does not power down monitor)
Power down
1. Touch the battery status icon.
2. Touch
Power down.
Change profile
1. Touch the selected profile indicator in the Device Status area.
2. Select the desired profile.
3. Confirm your selection.
Central station connectivity indicators
Connected to
Disconnected from
the central station
the central station
Start/Stop blood pressure
Start intervals
1. On the Home tab, touch
.
2. Select
Automatic or Program, and enter or select desired settings.
3. Touch
Start intervals.
Stop intervals
1. On the Home tab, touch
.
2. Touch
Stop intervals.