Welch Allyn Cardio Perfect Workstation ABPM6100 Install Instructions - Installation Guide User Manual
Windows vista, Workstation
INSTAllINg The ABPM 6100
ReCORDeR ON A CARDIOPeRfeCT
WORKSTATION
1 Plug the recorder into the serial port or
into a USB port.
Install two fresh AA batteries in the recorder. If the recorder is
on, turn it off. (Press and hold the Start/Stop button for five
seconds until the device emits five quick beeps.)
To plug into the serial port if available
Install the Keyspan software following the Keyspan
instructions (which might direct Vista users to download
drivers from their website). Select all defaults. Keyspan
product registration is optional.
Keyspan CD
(included in Keyspan
adapter package)
All Programs > Keyspan >
USB Serial Adapter > Keyspan Serial Assistant
Before you start, install the CardioPerfect Workstation software.
See separate installation guide.
To plug into a USB port if
no serial port is available
go to Step 2.
This screen might not come up.
Windows Vista
®
C A R D I O P E R F E C T
™
WORKSTATION
INSTA L L ATION GUIDE
Start/Stop button
Start/Stop button
(a)
Make a note of the COM port that is assigned to
your recorder. In this example, the port is COM5.
(b)
Close all windows.
b
a
go to Step 2.
Keyspan adapter