Welch Allyn Connex Vitalslink By Cerner, And Connex Csk Best Practices Overview - Installation Guide User Manual
Page 10
6
Best practices
Welch Allyn Network installation
SSID/Radio settings
•
Radio Beacon Interval set to =100 msec
•
DTIM set to 10
•
Enable short preamble
•
Disable channel 165
Wireless
Loss of connection and data, patient monitor will
not connect.
WLAN Optimization
•
Controller CPU utilization < 40%
•
Radio channel utilization < 40%
•
Number of SSIDs per AP
4
•
Number of clients per AP
25
•
Controller memory utilization
20Mb
•
Average RSSI of all clients
-67 dBm
•
AP Received packet error rate
10%
Wireless
When network performance is outside
recommended parameters, there is the potential for
loss or corruption of data.
Separation Separation distance between wireless devices should be
2 meters
Wireless
Possible data loss due to increased interference.
Best practice
Affected types Without best practice