Welch Allyn CSK Software Install Guide - Installation Guide - Manual (Page 23)

Installation guide Installation 19
AT-2 Plus
Before you install the Welch Allyn Connex CSK software do the following:
• Verify that the connectivity settings in the device software are properly configured.
For details, see the electrocardiograph directions for use.
• Verify that you have administrator rights for the PC.
• Close all programs before starting the installation.
To install the Welch Allyn Connex CSK software
1. Insert the Connex CSK CD. This screen appears:
If this screen does not appear, open Connectivity Install on the CD.
3. Select AT-2 Plus. Follow the instructions on the screen.
You can choose whether to add a shortcut to AT2WACP.exe in the Startup group of
your Windows Programs menu. If you do, this program will automatically start every
time you log in to Windows.
When installation is complete, set the CardioPerfect options as follows.
4. Start the CardioPerfect Workstation application .
5. Open the AT-2 Plus connectivity application by double-clicking its icon in the system
tray. (When this icon is present, the Workstation is listening for AT-2 Plus
electrocardiographs.)
Caution If you intend to use the AT2WACP functionality only sporadically
and need to have its COM port available for other uses, do not select the
automatic start-up functionality, or make sure you close the application every
time before requiring the COM port for other uses.
AT-2 Plus connectivity application icon