Xpres SubliJet IQ Epson WP-4015 (Power Driver Setup): Power Driver Installation Guide - Manual (Page 13)

Epson WorkForce Pro WP-4015 DN – Installation Guide
PowerDriver Installation & Registration
PAGE 13 of 16 >>
8.) If you receive the following screen, click Install this driver software anyway (see FIGURE 9).
FIGURE 8
9.) As installation nears completion, the following window will prompt you to register your product (see
FIGURE 10). DO NOT SKIP THIS STEP, registration is required to use the software. Click YES to
continue.
10.) You will use the Product ID to register your product. The Product ID is located in the PowerDriver
Registration window (see FIGURE 11). The easiest and fastest way to obtain a Registration Code
24/7 is by clicking the Obtain Registration Code button, also located in the PowerDriver Registration
window. Follow the on-screen instructions to receive a Registration Code via an automatic E-mail.
Note: You must have a separate Registration Code for every machine on which the “PowerDriver” is
installed.
FIGURE 9