Xpres SubliJet R Ricoh SG7100DN (Windows ICC Profile Setup): Driver Configuration - Manual

Ricoh SG 7100DN - WinProfile
Configuration Guide
PAGE 1 of 4 >>
v20130218
The following instructions will demonstrate how to configure the Ricoh SG 7100DN printer driver to
print using the SubliJet-R Ricoh SG 7100DN WinProfile.
1.) To begin, click your Start icon and select Devices and Printers (see FIGURE 1). If you are using an
older version of Microsoft Windows, you will instead select Printers and Faxes.
NOTE: You can also access the Ricoh SG 7100DN Printing Preferences window by clicking
“Print Properties” or “Print Preferences” within the print window of your graphic design
software.
FIGURE 1
2.) In the Devices and Printers folder, right-click on the RICOH AficioSG7100DN RPCS-R printer driver
icon and select Printing Preferences (see FIGURE 2). This will open the Printing Preferences window
(see FIGURE 3).
1
2
FIGURE 2
1 2