Xpres Subli-Print Epson 1290: CorelDRAW 10 onwards instructions User Manual
Installing & setting up the epson 1290 printer
1
Diagram 1
Diagram 2
Diagram 5
Diagram 4
Diagram 3
Diagram 6
Diagram 7
Diagram 8
Diagram 9
Diagram 10
Diagram 11
Click
Custom
Click
Advanced
Click
Save settings
Name it
Subli-print
Click 'Save' then click
OK until all open boxes
are closed.
Installing & Setting up the Epson 1290 printer
Insert the Epson Stylus 1290 software CD-ROM into your CD-ROM drive. The CD will auto run. Select 'Install printer
Driver / Utility' from the menu, and click the arrow as in the diagram 1 below. When Diagram 2 appears click OK. It
will now copy files to your computer as in diagram 3. Make sure the USB cable is connected to the PC and printer,
then turn on the printer as instructed in diagram 4. After the utility has found your printer it will confirm this as in
diagram 5. The Epson 1290 has now been successfully installed.
Now follow the Epson 1290 driver setup below.
Browse to the Printers and Faxes folder. Right click on the Epson 1290 printer and click on 'Properties'. Click on
'Printing preferences as in diagram 6, then follow the diagrams below.
1
2
3
4
1
2
3
4
. Plain Paper
. Photo - 720dpi
. Tick all boxes
. No Color
Adustment