Xpres Subli-Print Epson D88: Bulk Feed instructions - Series 3 - Manual

Make sure you have the relevant parts with your
system
These include:
1. 1 x Prefilled cartridge, tube and bottle
assembly.
2. 1 x Tube support (clip comes in three parts)
3. 1 x bag containing 4 x air filters and small tube
clip
4. 1 x Syringe (used for filling bottles later, not
used in installation.
5. 1 x Computer disc containing ICC profile and
all relevant pdf files for using the system.
Press the ink button until the cartridges reach the
‘change’ position and unplug the Mains Cable from
the rear of the printer Remove any cartridges.
Gently remove the cartridge lid from the printer There is a small spring to remove on the left side of
the lid.
Page 1
Epson D88 Bulk Feed
Installation