Zippy MRG-6500P User Manual

Zippy Accessories for electrical

Advertising
background image

1.1 INTRODUCTION

First of all, thank you for purchasing MRG series redundant power supply.

The MRG series is a 1+1 hot-swappable / hot-pluggable redundant power supply. It

consists of,

1) complete metal frame

2) compact size power module

3) backplane

The MRG series hot swappable redundant power supply offer maximum 460 / 500

watts, and provide Active Power Factor correction (PFC) at full range AC input that

complaints to EN 61000-3-2 for CE norms. The power module is in compact size, and

built-in a 40mm ball bearing DC fan for better ventilation. Each power module is

designed with 6 outputs (+3.3V, +5V, +12V, -5V, -12V, and +5Vsb) circuits. All you can

see on the backplane is just passive components and this is the key point for longer

MTBF.

The units also offer a warning sub-system, including LED display, buzzer alarm, TTL

signal. It guides user the fast way to find out the power supply status.

When all the power modules operate normally, it balances the load share through its

parallel design, which increases the reliability of power system.

To really discover the power system and ease in using it, we recommend you to read

through this manual carefully.

Advertising
This manual is related to the following products: