Cisco 7925G-EX - Manual (Page 10)

8-10
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing the Phone Status Menu
CFG file not found Neither the name-based configuration
file nor default configuration file were
not found on the TFTP Server. The configuration file for a phone is created when
the phone is added to the
Cisco Unified Communications Manager
database. If the phone has not been added to the
Cisco Unified Communications Manager
database, the TFTP server generates a
CFG File
Not Found response.
• Phone is not registered with
Cisco Unified Communications Manager.
You must manually add the phone to
Cisco Unified Communications Manager if
you are not allowing phones to auto-register.
See
“Methods for Adding Phones to Cisco
Unified Communications Manager” section on
page 3-2
for details.
• If you are using DHCP, verify that the DHCP
server is pointing to the correct TFTP server.
• If you are using static IP addresses, check
configuration of the TFTP server. See
“Configuring IP Network Settings” section on
page 4-23
for details on assigning a TFTP
server.
CTL Installed A certificate trust list (CTL) file is
installed in the phone. None. This message is informational only.
For more information about the CTL file, see Cisco
Unified Communications Manager Security Guide.
CTL update failed The phone could not update its
certificate trust list (CTL) file. Problem with the CTL file on the TFTP server.
For more information, see Cisco
Unified Communications Manager Security Guide.
Duplicate IP Another device is using the IP address
assigned to the phone. • If the phone has a static IP address, verify that
you have not assigned a duplicate IP address.
See
“Configuring IP Network Settings”
section on page 4-23 section for details.
• If you are using DHCP, check the DHCP server
configuration.
LCS operation failed The locally significant certificate (LSC)
that is used for the security features did
not install properly. For information about how to manage the LSC for
your phone, see the “Using the Certificate
Authority Proxy Function” chapter in
Cisco Unified Communications Manager Security
Guide.
LCS operation complete The LCS was updated successfully on
the phone. For information about how to manage the LSC for
your phone, see the “Using the Certificate
Authority Proxy Function” chapter in
Cisco Unified Communications Manager Security
Guide.
Table 8-4 Status Message, Description, and Possible Explanation and Action (continued)
Status Message Description Possible Explanation and Action