Compaq A3000 EN - Manual (Page 11)

Settings
Settings
9
Controls and settings
This section describes the A3000 Control Panel, and the Settings Utility software.
Control panel features
# Button Description
1 power Turns the power on or off.
2 up/down Use to change the current setting while in a menu.
3 menu Selects one of the menu settings.
4 copy mode Changes the copy mode between black and color.
5 display Displays menus and status messages.
6 custom copy Enables the custom copy features.
7 scan Accesses the Scan To mode. Use the up/down buttons
to select a scan destination, then press start.
8 setup Selects one of the system setup menus.
9 form feed Use to continue printing after reloading paper tray, or
to remove paper if it does not exit after printing.
10 cancel/no Cancels an operation at any time. Also provides a No
response when answering questions.
11 start/yes Starts a copy or scan job. Also provides a Yes response
when answering questions.
2 4 5 6 7 8 9 1 3 10 11