Canon IMAGEFORMULA P-150 - Manual (Page 56)

56
2
Open the feeder cover.
3
Remove any dirt from the scanning glass, separation pad
and rollers inside the scanner (parts
shown in the
figure).
Use a clean dry cloth to wipe off any dirt on the scanning glass.
Wipe off any dirt on the rollers with a cloth that has been
dampened with water, and then wipe the rollers with a clean soft
dry cloth.
Remove the feed rollers before cleaning them. For details on
removal,
see “Replacing the Feed Rollers” on p. 57 .
PULL
Feed Rollers