Chauvet DMX-690 - Manual (Page 16)

T O C H A N G E T H E P A N R A N G E :
1) Press <MODE/ESC> until , , or is displayed..
2) Use the <UP> and <DOWN> buttons to scroll through the three options. is 540°;
is 360°; is 180°
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
settings will not affect a fixture operating in DMX mode.
T O C H A N G E T H E T I L T R A N G E :
1) Press <MODE/ESC> until , , or is displayed..
2) Use the <UP> and <DOWN> buttons to scroll through the three options. is 270°;
is 180°; is 90°
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
settings will not affect a fixture operating in DMX mode.
Service Functions
T O R E S E T T H E F I X T U R E :
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now reset itself.
T O R E S T O R E A L L S E T T I N G S T O T H E I R F A C T O R Y D E F A U L T S :
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now load all factory default settings.
Intimidator Spot 2.0 HTI Manual 16 2007-01-24/09:36