Bissell Lift-Off Dep Cleaner 94Y2 - Manual (Page 2)

^ ^ A s s e m b l y
1. slide upper handle onto base
2. Screw 4 screws into the marked holes
NOTE: Two screw holes ore located under the support handle
3. Wrap power cord around cord wrap on side of portable spot cleaner
4. Attach tough stain tool to hose grip (extra tool storage located on back)
5. Wrap flex hose on other side of portable spot cleaner and secure with hose latch
[I^Before you begin cleaning
1. Move furniture to another area if cleaning an entire room
2. Vacuum area with a dry vacuum cleaner
3. PreTreat spots & stains and heavy traffic areas (optional- see User's Guide)
(I^Carpet cleaning (upright mode)
1. Fill the formula & water tank
a. Remove the formula tank from the base of the machine (located on
back of portable spot cleaner)
b. Unscrew the black cap and remove insert
c. Fill tank with hot tap water to the WATER fill line and add two ounces
of BISSELL 2X formula
d. Replace the insert and tighten black cap
e. Replace formula tank on machine
ICarpet cleaning (upright mode)
2. Cleaning
a. Plug the power cord into a proper outlet and press the power button
NOTE: Allow 1 minute for hot water heater to warm-up
b. While pressing the trigger, make one slow forward wet pass and
another one back
c. Release the trigger and make another slow forward and backward
pass over the same area. Repeated dry passes will help aid in dry time
d. Continue passes until the cleaning area is complete
3. Empty dirty tank when it reaches the "FULL" line
a. Remove dirty tank
b. Unlock the tank lid by rotating the handle over the back of the tank
c. Remove lid to pour out dirty water and rinse
d. Replace top of tank and rotate the handle forward to lock in place
e. Replace the tank on the machine
4. Refill as needed following step #1
'i-
For complete user's guide, visit www;l>£sse/l.com
34-0067-001-202