Controls, Nomenclature, Names of buttons – Clarion RX755VD User Manual

Page 4: Controls / commandes / controles, English français español english, English, When the front panel open

Advertising
background image

VRX755VD

7

5

VRX755VD

6

VRX755VD

English

Français

Español

English

Owner

’s

manual

English

Owner

’s

manual

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

With the Front panel open /

Avec le panneau avant ouvert

/ Con el panel frontal abierto

3. CONTROLS / COMMANDES / CONTROLES

[BAND]

[VOL]

[DISP]

[ISR]

[SENSOR]

[

s

]

[DIRECT]

[OPEN]

[ADJ]

[FRONT
OPEN
]

[SOURCE]

[FRONT OPEN]

[

Q

]

[TILT]

4. NOMENCLATURE

When the Front panel open

[VOL] button

• Use this button to increase/decrease the

volume.

[BAND] button

• Press this button to switch the receiving

bands for radio/SIRIUS/TV mode, etc. Press
and hold this button for 1 second or longer to
switch the SEEK/MANUAL tuning modes.

• Use this button to move to the first track on a

disc in the DVD video mode.

• Use this button to switch to the next disc in

the changer mode.

[SOURCE] button

• Press this button to turn on the power. Press

and hold this button for 1 second or longer to
turn off the power.

• Press this button to switch the modes such as

radio.

[SENSOR]

• Remote control infrared sensor.

[ISR] button

• Use this button to enter the ISR (Instant

station recall) standby mode.

• Press and hold this button for 2 seconds or

longer to store the current station into ISR
memory in the radio mode.

ISR is disabled when 2-ZONE is ON.

[OPEN] button

• Use this button to open/close the liquid crystal

panel.

• Press and hold this button for about 2

seconds or longer so that the liquid crystal
panel is positioned horizontally when the
liquid crystal panel is open (Air Conditioner
Operation mode).

Names of Buttons

Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5

(unfold).

[ADJ] button

• Shows the ADJUST mode menu to change

the settings when the liquid crystal panel is
open.

• Press and hold this button for 1 second or

longer, the liquid crystal panel can be
switched to a composite screen to lock the
monitor. (To enable this function, go to the
GENERAL menu (within the ADJUST mode
menu), and use the [CONNECT] key to select
NAVI” or “OTHERS”).

[DIRECT] buttons

• Use this button to select a preset channel in

the radio/SIRIUS/TV mode.

• Use this button to select a disc in the changer

mode.

• Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current
station into preset memory.

[

a

], [

d

] buttons

• Use this button to tune to a station in the

radio/SIRIUS/TV mode.

• Use this button to select a track in the CD,

Video CD, MP3, iPod and CD changer mode.

• Use this button to select a chapter in the DVD

video and DVD changer mode.

[

s

] button

• Press this button to enter the play pause

mode in the DVD video mode, iPod mode and
changer mode. Press the button again to
resume playback.

• Press and hold this button for 1 second or

longer to mute the sound in the DVD video
mode, iPod mode and changer mode.

• Press this button to mute the sound in the

radio/SIRIUS/TV/VISUAL mode.

[DISP] button

• Use this button to switch the indications such

as play status on the information panel.

[FRONT OPEN] button

• Use this button to open the Front panel.

[TILT] button

• Use this button to adjust the angle of the liquid

crystal panel in 5 steps when the liquid crystal
panel is open.

• When the panel is closed, holding this button

depressed for 2 seconds or longer will enable
the panel calibration function.

[

Q

] button

• Use this button to eject a disc.

Advertising