Mode functions – Cobra Electronics MICROTALK CXR700C User Manual

Page 8

Advertising

Customer Assistance

Warranty

Introduction

Operation

Mode Functions

Operation

Set DCS Privacy Codes

•

To select a DCS privacy code:
1. After selecting a channel, press the Mode

button until the DCS icon appears and the
small numbers flash on the display
(01 through 104).

NOTE
If CTCSS is turned on at the channel
selected, the display will flash the
DCS icon and “OFF.” To switch from
CTCSS to DCS, press the Channel Up
or Channel Down button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.

2. Press using the Channel Up or Channel Down

button to select a DCS privacy code. You can
hold the Up or Down button for fast advance.

3. When your desired DCS privacy code is

displayed, choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock/Enter button to enter the

new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to
Standby mode.

Mode Button

Channel Button

DCS Privacy Code

Nothing Comes Close to a Cobra

Set CTCSS Privacy Codes

•

To select a CTCSS privacy code:
1. After selecting a channel, press the

Mode button until the CTCSS icon appears
and the small numbers flash on the display
(01 through 38).

NOTE
If DCS is turned on at the channel
selected, the display will flash the
CTCSS icon and “OFF.” To switch from
DCS to CTCSS, press the Channel Up
or Channel Down button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.

2. Press using the Channel Up or Channel

Down button to select a CTCSS privacy
code. You can hold the Up or Down
button for fast advance.

3. When your desired CTCSS privacy code is