Chicago Electric 65760 - Manual (Page 6)

SKU 65760 For technical questions, please call 1-800-444-3353. Page 6
Grip tool as lightly as possible (while 6.
still keeping safe control of it). Let
the tool do the work.
To reduce vibration, maintain the tool
7.
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SaVe tHeSe
inStructionS.
grounding
to preVent
electric SHocK
and deatH From
incorrect grounding
Wire connection:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the gFci power cord
plug provided with the tool.
do not use the tool if the
power cord or plug is
damaged. if damaged, have it
repaired by a service facility
before use. if the plug will not
fit the Outlet, have a proper
Outlet installed by a qualified
electrician.
double insulated tools: tools
with two prong plugs
Tools marked “Double Insulated” do 1.
not require grounding. They have
a special double insulation system
which satisfies OSHA requirements
and complies with the applicable
standards of Underwriters Laborato-
ries, Inc., the Canadian Standard As-
sociation, and the National Electrical
Code.
(See outlets for 2-prong plug.)
Double insulated tools may be used
2.
in either of the 110 volt outlets shown.
(See outlets for 2-prong plug.)
SYmBologY
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
a
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)