Cisco 7965G - Manual (Page 6)

3-6
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15427-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
4. Connect the power supply to the Cisco DC Adapter
port.
Optional.
See the “Providing Power to the Phone” section on page 2-3 .
5. Connect a straight-through Ethernet cable from the
switch to the 10/100/1000 SW port.
Each Cisco Unified IP Phone ships with one Ethernet
cable in the box.
You can use either Category 3/5/5e/6 cabling for 10
Mbps connections, but you must use Category 5/5e/6
for 100 Mbps connections and Category 5e/6 for 1000
Mbps connections.
See the “Network and Access Ports” section on page 3-2 for
guidelines.
6. Connect a straight-through Ethernet cable from
another network device, such as a desktop computer,
to the 10/100/1000 PC port.
Optional. You can connect another network device
later if you do not connect one now.
You can use either Category 3/5/5e/6 cabling for 10
Mbps connections, but you must use Category 5/5e/6
for 100 Mbps connections and Category 5e/6 for 1000
Mbps connections.
See the “Network and Access Ports” section on page 3-2 for
guidelines.
Table 3-1 Installing the Cisco Unified IP Phone 7965G and 7945G (continued)
Task Purpose Related Topics