Cabletron Systems 2000 - Manual (Page 97)

Managing the Hub 2-75
The SmartSwitch 2000 Chassis View
Setting the Device Date and Time
You can select the Edit Device Time and Edit Device Date options from the menu
to change the date and time stored in the deviceÕs internal clock.
To edit the device time:
1. Click on Device on the Chassis View window menu bar to access the Device
menu. Click Edit Device Time.
2. The following change window, Figure 2-28 , will appear.
Figure 2-28. The Edit Time Window
3. Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the
field you wish to change and using the up and down arrow buttons, or by
simply entering the new value in the appropriate field.
4. Click on the OK button to save your changes, or on the Cancel button to
cancel.
To edit the device date:
1. Click on Device on the Chassis View window menu bar to access the Device
menu. Click Edit Device Date.
2. The following change window, Figure 2-29 , will appear.
Figure 2-29. The Edit Date Window