Canon DR-4010C - Manual (Page 48)

Chapter 3 Basic Operation
3-18
2
Follow the procedure below to select the Canon DR-4010C Document Scanner as the
scanner to be used.
1. On the [Scan] menu, click [Select Scanner].
2. Select [Canon DR-4010C] Æ click [OK].
Note
If [Canon DR-4010C] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver.
(See “2-3 Installing the Software,” on p. 2-4.)
3. Set the Default Page Size and click [OK].
Note
This dialog box is displayed only when you select [Canon DR-4010C] for the first time and
click [OK], or when you click [Setup] for [Scanner Selection].