Cowon Systems 6 - Manual (Page 32)

32
iAUDIO 6
Using Advanced Features
- Recorded files are stored in “VOICE” folder if recorded via built-in microphone, or in “RECORD” folder if recorded via Line-In cable.
- To use JetEffect, Fast-forward and rewinding capabilities, the recorded audio files should be played in Music mode.
- If the player was in Record mode before turning the player off, the player will start with the Record mode when turned on again.
- Sound quality and capacity of recordings may vary according to reception quality and recording settings. See the section 4.7 for
further information
3.4. Viewing Images
■ Recording with Line-In Connection
1. Use the Line-In cable to connect the headphone jack of your audio source device with the Line-In jack
of iAUDIO.
2. Make sure the recording mode is set to Line-In in Settings – Recording – Recording Mode menu.
3. Switch to the Record mode by pressing “MENU” button and then choose Record icon.
4. Start the playback on your CDP and then press the “REC” button on iAUDIO to start recording.
5. During recording, touch the “PLAY” button to pause or resume the recording.
6. Touch “REC” button to end recording.
7. To play recorded files, touch “PLAY” button.
JetEffect
Play Mode
Display
Timer
General
Recording
FM Radio
Linein bps
Voice bps
FM bps
Mic volume
Line volume
Auto Sync
Recordimg Mode
128K
64K
128K
High
4
Off
Line In
CDP
Playback
DSC01.jpg
DSC02.jpg
DSC03.jpg
DSC04.jpg
DSC05.jpg
DSC06.jpg
DSC07.jpg
PICTURE
View
Wall Paper
SlideShow