Christie Digital Systems 103-008100-01 - Manual (Page 20)

20
BASIC OPERATION
TURNING ON THE PROJECTOR
TURNING ON / OFF PROJECTOR
Connect the projector’s AC power cord into an AC
outlet. The LAMP indicator lights RED, and the READY
indicator lights GREEN.
Press the POWER ON-OFF button on the top control or
on the remote control. The LAMP indicator dims, and
the cooling fans start to operate. The preparation
display appears on the screen and the countdown
starts.
2
3
1
16
The preparation display disappears after 30 seconds.
4 After the countdown, the input source that was selected
the last time and the Lamp control status icon (see
page 41) appear on the screen.
If the projector is locked with a PIN code, a PIN code
Input Dialog Box appears. Enter a PIN code as
instructed below.
Selected Input Source and Lamp control
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
What is PIN code?
PIN (Personal Identification Number) code is a security code that
allows the person who knows it to operate the projector. Setting a
PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code
lock function in SETTING Menu on page 43 for locking operation
of the projector with your PIN code.
Pointer
PIN code Input Dialog Box
To Enter a PIN code
Select a number by pressing the POINT LEFT/RIGHT button and
fix the number with the SELECT button. The number changes to
“
✳.” If you fixed a wrong number, move the pointer to “Set” or
“Clear” once by pressing the POINT DOWN button, then return to
“PIN code.” Enter the correct number.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer automatically
moves to “Set.” Press the SELECT button so that you can start to
operate the projector.
If you entered a wrong PIN code, “PIN code” and the number
(
✳✳✳✳) turn red and disappear. Enter a PIN code all over again.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take special care in setting a new
PIN code; write down the number in a column on
page 60 of this manual and keep it at hand. Should
the PIN code be missing or forgotten, consult your
dealer or service center.
After the OK icon
disappears, you can
operate the projector.
Lamp control status