Clam Corp CLAM 5600 8201 - Manual (Page 7)

ASSEMBLY INSTRUCTIONS
5. DISMANTLING YOUR CLAM
a. To take your Clam 5600 down, repeat steps 1–3 in reverse order. Lay all the poles on one
side of the base. Fold the tent into the base, making sure you don’t fold or crease the
windows as that could cause them to crack. See Diagram J.
b. Close up the base and secure the rubber latches. See Diagram K.
Note: Continuous pulling behind a four wheeler or snowmobile will result in premature
wear of the base. We recommend a ski or slide system be mounted to the base of your
Clam ( i.e., nylon strapping or old downhill or cross country skis).
ASSEMBLY DIAGRAMS
DIAGRAM A DIAGRAM B
Page 7