Canon IXUS 1000 HS - Manual (Page 149)

Changing Shooting Function Settings
149
Changing the Way the Image Displays Right After
Shooting
You can change the way the image displays right after shooting.
● Choose [Review Info], then press the qr
buttons to choose an option.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints.
● Choose [Disp. Overlay], then press the qr
buttons to choose an option.
Off Displays the image only.
Detailed
Displays detailed information
(p. 164) .
Focus Check
The area inside the AF frame is
magnified, allowing you to check
the focus. The procedure is the
same as in “Checking the Focus”
(p. 112) .
Grid Lines A grid overlays the screen.
3:2 Guide
Gray bars appear on the top
and bottom of the screen. This
area will not print when printing
on paper with a 3:2 aspect
ratio.
Both
Both grid lines, and the 3:2
guide appear.
• In , you cannot set [3:2 Guide] or [Both].
• Grid lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.