Allen Sports S303 - Manual (Page 2)

MODEL S303 INSTRUCTIONS
ENGLISH - PAGE 2
LOADING BICYCLES ON RACK:
C.
1. REMOVE ALL LOOSE ITEMS FROM BICYCLES (PUMPS, BAGS, ETC.), AND CHECK
THAT ALL QUICK RELEASE HUBS ARE TIGHT.
2. LOAD FIRST BICYCLE INTO THE FIRST TIE-DOWN POSITION (THE ONE CLOSEST
TO VEHICLE) WITH ITS CHAIN AND GEARS FACING AWAY FROM RACK. MAKE
SURE THAT BICYCLES DO NOT COME IN CONTACT WITH VEHICLE.
3. LOAD SUBSEQUENT BICYCLES IN ALTERNATING DIRECTIONS. FOR BEST
WEIGHT DISTRIBUTION, LOAD HEAVIEST BICYCLES FIRST, WITH LIGHTER
BICYCLES ON THE OUTSIDE. ADD PADDING BETWEEN BICYCLE CONTACT
POINTS, IF NECESSARY.
SECURING BIKES TO RACK:
D.
ALL BIKES MUST BE SECURELY TIED TO RACK. USE INDIVIDUAL
TIE-DOWN STRAPS, OR ADDITIONAL STRAPS IF NECESSARY.
IMPORTANT:
SECURE FRONT WHEEL OF INSIDE BICYCLE WITH EXCESS
BOTTOM STRAP, OR ADDITIONAL STRAPS TO PREVENT
WHEEL FROM COMING INTO CONTACT WITH VEHICLE.
1. PLACE BICYCLE IN CRADLE. 2. PULL STRAP TIGHT.
ALLEN LIFETIME WARRANTY:
IF AN ALLEN BIKE RACK IS FOUND TO HAVE A DEFECT IN WORK-
MANSHIP OR MATERIAL OVER THE LIFETIME OF THE ORIGINAL
PURCHASER, ALLEN WILL REPAIR OR REPLACE THE RACK FREE
OF CHARGE. THE WARRANTY DOES NOT COVER DAMAGE OR WEAR
WHICH OCCURS AS A RESULT OF DAY TO DAY USE OR GENERAL
WEAR AND TEAR.
R. A. ALLEN CO., INC.—ALLEN BIKE RACKS
60THOREAU ST. - #61
CONCORD, MA 01742, USA
(800) 722-5536
FAX: (772) 234-5796
WWW.ALLENRACKS.COM - [email protected]
©2013 R. A. ALLEN CO., INC., ALL RIGHTS RESERVED
V.06.13
4. AFTER BICYCLES ARE LOADED, CHECK THAT ENTIRE RACK IS SECURE,
AND THAT THE RACK IS FIRMLY IN PLACE. VISION OUT OF REAR
WINDOW MAY BE RESTRICTED—USE SIDE MIRRORS ACCORDINGLY
WHEN BACKING UP.
SPECIAL NOTE ON INSTALLING WOMEN’S STYLE FRAMES:
PLACE ONE CARRY ARM UNDER FRONT TOP TUBE. WITH THE OTHER
CARRY ARM, ROTATE TIE-DOWN CRADLE, AND PLACE CARRY IN SPACE
BEHIND SEAT TUBE AND BELOW REAR DOWN-STAY. THE
ALLEN 900B
ADAPTOR BAR IS ALSO RECOMMENDED FOR THIS APPLICATION.