Allen Sports AST100 - Manual (Page 5)

INSTRUCTIONAL
OWNER’S MANUAL
p
5
SAFETY FLAG INSTALLATION
STEP 1:
NOTE:
Assemble the flag and insert the end into the small sleeve on the side of the trailer skin.
Reattach the Velcro to secure the cover.
Flag should be removed before attempting to fold trailer
Your trailer is equipped with a combination wheel guard/parking brake for added safety. When loading or un-
loading or parking your trailer, engage the parking brake to prevent the trailer from moving. The brake housing
helps to deflect the tire from obstructions that might stop the trailer and result in an accident.
WARNING!: This flag is meant for use only with the trailer. This flag is not a toy. Do not let your child play
with this flag at any time. Failure to comply with this warning could result in serious injury
of your child.
WHEEL GUARD/PARKING BRAKE INSTALLATION
STEP 2:
STEP 3:
STEP 5:
STEP 4:
NOTE:
STEP 1:
Locate the 2 holes in the front of the side frame, just in front of the wheel.
Unpack poly-bag and check that all parts are included.
Place screws through holes in frame – from inside to outside, as shown.
To operate brake, simply move lever outward to contact tire, release by pushing the lever in toward frame.
Place the Guard/Brake Assembly against the frame, and tighten the screws until snug.
The nut is secured inside the plastic housing so you will not need a wrench or plier to hold the
nut while tightening the fixing screw.
PARTS INCLUDE:
1 - Hex Key; 4 - Screws; 2 - Wheelguard/ Brakes