Allen Sports AST2 - Manual (Page 7)

INSTRUCTIONAL
OWNER’S MANUAL
p
7
FOLDING FOR STORAGE AND TRANSPORT
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7:
STEP 8:
STEP 9:
STEP 1:
Unclip the tow bar safety strap from the “D” ring, and remove pin to remove hitch
from frame.
Remove children and all cargo from inside the passenger compartment.
Clip the end of the strap back on to the tow bar “D” ring.
Remove the flag and pole and separate the three sections.
Remove the quick-release pins form the stub axles of the rear wheels.
Remove the quick-release pin from the tow bar bracket at the front corner of the trailer.
Fold the tow bar back under the trailer, and replace the quick-release pin through
the tow bar and U-channel
Place wheels and flag inside the passenger compartment, and close the front cover.
Fold upper cabin as shown above:
a. Remove 4-season Rain cover
b. Remove QR pin from both sides.
c. Fold frame down as shown.
d. Fold in until trailer is flat
NOTE: Store trailer in a cool, dry environment, away from direct sunlight. After extended periods of storage, check tires for
wear or cracking, and fabric and strapping for signs of wear.
After extended periods of storage, it is recommended that the trailer is inspected by a qualified bicycle mechanic
prior to use.
WARRANTY
IF YOUR PRODUCT REQUIRES WARRANTY SERVICE, PLEASE DO NOT RETURN IT TO RETAIL STORE.
PLEASE CONTACT:
ALLEN SPORTS USA
(800) 722-5536 ~ [email protected]
Please note that all returns and exchanges are subject to the return policy of the retailer where
the product was originally purchased
R. A. ALLEN CO., INC. - 505 BEACHLAND BLVD. - STE. 5 - VERO BEACH, FL 32963
Product designed in USA, Made in Ningbo, China