Instructional owner’s manual, Safety flag installation, Harness – Allen Sports XLT2 User Manual

Page 5

Advertising
background image

INSTRUCTIONAL

OWNER’S MANUAL

5

SAFETY FLAG INSTALLATION

STEP 1:

Assemble the flag and insert the end into the small sleeve on the side of the
trailer skin.

WARNING!:

This flag is meant for use only with the trailer. This flag is not a toy. Do not let

your child play with this flag at any time. Failure to comply with this warning

could result in serious injury of your child.

HARNESS

STEP 2:

STEP 3:

STEP 4:

STEP 5:

STEP 1:

Unclip the straps and place your child in the seat. Adjust the upper buckles to fit snugly
above your child’s shoulders.

Place a single child in the center and use the center strap in the middle. For two children use
the outer center straps and shoulder straps

The crotch strap buckle should come just below your child’s belly button, where a normal belt
could lay. Adjust the ladder lock so the buckle is in the correct position
Buckle the two side straps to the crotch strap and adjust snugly so you can fit average size
fingers between belt and your child.
The buckle should be centered in your child’s abdomen. Hook the shoulder straps to the
D-rings on the buckle and adjust the ladder locks so they fit snugly.

WARNING!:

To avoid serious injury or death, children should always wear the seat belt and shoulder straps and helmet.

FIGURE 15.

Advertising