Allen&Heath WAVES Quick Start User Manual
Allen & heath m-waves quick setup guide, Registration, Software download
1
Allen & Heath M-Waves Quick Setup Guide
Registration
You must register your Allen & Heath M-Waves card to obtain the software, the drivers and any licenses
needed.
To register your device, log into your Waves account at
Software Download
Go to Waves.com > Downloads
and select Allen & Heath M-Waves.
Download the latest version for Mac or PC, as needed.
Run the installer and follow the onscreen instructions.
Connections
Insert the M-Waves to your Allen & Heath stage box.
Connect the Allen & Heath M-Waves card to your computer.
If you are using just one M-Waves card, connect it directly to your computer’s Gigabit Ethernet port
using the supplied cable.
If you are using several M-Waves cards and/or multiple SoundGrid interfaces, computers, etc., connect
them all to a SoundGrid-compatible switch and connect the switch to your computer’s Ethernet port.
Se
for a list of approved switches.
Simple Recording/Playback Setup with the SoundGrid Studio Application
Use the SoundGrid Studio Application as your setup application. Refer to the following images for
configuration.