Allen&Heath QU-PAC - Manual (Page 14)

Qu-Pac Getting Started Guide 14 AP9815 iss1
Processing screen
- Access the processing for the currently
selected channel. Touch the top part of the screen to open the page for each
processing type. Touch a parameter box to highlight it and use the rotary to adjust
its value.
Input Preamp/Linking/Insert/Delay, Gate, PEQ, Compressor
Output Delay/Insert, PEQ, GEQ, Compressor
Note – To turn phantom power on or off, touch and hold the 48V button for 1
second or longer. This is to prevent accidental operation.
Routing screen
- Access the routing parameters for the currently
selected channel. Use the tabs to open the available routing pages.
Input channel routing pages let you toggle Pre/Post fade and assignment On/Off
settings. You can access send levels and pan, or alternatively use the
Channel
screen for quick access to these while mixing.
Global Direct Output options are also available from the input routing page. Set
these according to your application, for example FX send, USB recording source,
ME personal monitor source, Ducker trigger source.
Mix master routing pages also provide access to global Pre/Post, On/Off, mix
source select, and stereo output Balance control.
Press the Fn key to access the Mute and DCA Group naming and assignments while
in any routing page apart from Matrix.
Press the Fn key while a Matrix is selected to access the sends to that matrix.
Screen Rotary
- Use this to adjust the value of the parameter
highlighted in orange on the touch screen. The rotary also lets you scroll through
selections in menus, scene lists and setup spin boxes.
Fn key
- Press this key to open a page of additional options if available
for the currently selected screen. The page function is labelled in the screen above
the key. Exit the page by pressing the key again.
SoftKeys
- Use these for quick access to functions such as commonly
used mutes, recalling specific scenes, navigating scenes, tap tempo, talking to the
stage, clearing active PAFL and more. SoftKeys are assigned using the
Setup /
Control / SoftKeys screen.
7
6
5
4
3