Auralex Deluxe Plus Roominator Kit - Manual

Roominator Performance Series ™
USER GUIDE
Auralex ® Acoustics, Inc.
1-800-959-3343 / 317-842-2600 / Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
EACH KIT INCLUDES:
INSTALLATION:
Project ➋ ™
(24) 2’x2’x2” Studiofoam ® Wedge
(8) LENRD ® Bass Traps
(144) EZ-Stick Pro ™ Tabs
Deluxe Plus ™
(24) 2’x2’x2” Studiofoam ® Wedge
(8) LENRD ® Bass Traps
(6) T’Fusor ™ Diffusors
(168) EZ-Stick Pro ™ Tabs
Pro Plus ™
(36) 2’x2’x2” Studiofoam ® Wedge
(12) LENRD ® Bass Traps
(8) T’Fusor ™ Diffusors
(248) EZ-Stick Pro ™ Tabs
STUDIOFOAM ® WEDGE
T’FUSOR ™
LENRD ® BASS TRAP
EZ-STICK PRO ™
Studiofoam Wedge, LENRD Bass Traps and T’Fusor Diffusors can be
mounted to standard drywall with the included
EZ-Stick Pro Tabs. Be advised
that the EZ-Stick Pro Tabs are designed for permanent installations and will
damage drywall and painted surfaces when removed.
Mark the target position on your wall or ceiling where the product will be
mounted using small pencil marks, pieces of masking tape or any similar non
marring method. Be sure the surface where the
EZ-Stick Pro Tabs will adhere is
free of dirt, dust or other oily contaminants by spot cleaning with rubbing alcohol.
Studiofoam Wedge Panels and LENRD Bass Traps use 6, while T'Fusor
Diffusors use 4, EZ-Stick Pro Tabs each.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the
rear side of the products perimeter, usually near the corners. On LENRDs, place
the tabs along the thin edge as shown below. Apply firm pressure and wait
about 5 minutes for the adhesive to set. Remove the second layer of the release
paper from each of the
EZ-Stick Pro Tabs, carefully orient the panels position
prior to contact with the wall, then press in place with moderate pressure.
99
0-
41
3.
Ro
om
in
at
or
s P
er
fo
rm
an
ce S
er
ie
s U
se
r G
ui
de
.in
dd (
07
/1
1/
20
14 - 1
:1
6 P
M
)
LENRD ® (Ez-Stick Pro Tab Placement)