Casio DT-930 - Manual (Page 36)

E-36
Using the Bridge Basic Cradle
1 LED power indicator Indicates the charge status of the battery and whether the DT-930
is mounted.
Off:
Power OFF
Lit Green: Power is ON and the DT-930 is correctly mounted.
Lit Red:
Power is ON and the DT-930 is not correctly mounted.
2 USB connection status Indicates that the USB connection is normal.
Off:
USB connection is not normal.
Lit Green: USB connection is normal.
3 Power supply terminal Supplies power to the DT-930. (For use with AC adaptor only)
4 Infrared Interface Non-contact infrared interface. Used to communicate with the DT-
930.
5 Terminal detection switch Detects whether or not the DT-930 is mounted correctly.
6 Power switch Turns power ON and OFF.
7 AC adaptor jack For connection of the AC adaptor (AD-S15050AE) to supply power.
8 USB interface For connection to a PC and uploading/downloading of system data
and file data. Also to draw power through the connection to the PC.
A special driver needs to be installed in the PC before connecting
the Handheld Terminal to the PC.
9 Wall mount unit attachment Install the wall-mount unit with the wall mounting screws.
10 Desktop unit Stand for using the Handheld Terminal on a desktop. Remove it
when mounting the cradle to a wall.
Top
Front Right side Back
POWER LINE
POWER LINE