CA Technologies Agent for IBM R12.5 - Manual (Page 14)

Preinstallation Tasks
Preinstallation Tasks
Before installing the agent on computers running IDS, modify the Windows
environment as described in the following sections.
Modify the Windows Environment for ISM Systems on IDS Versions
You must modify the Windows environment for computers running Informix
Storage Manager (ISM) with IDS Versions 9.40, 10.0, and 11.10.
To modify the Windows environment
1. Select System in the Control Panel.
The System Properties dialog opens.
2. Select the Advanced tab, and click Environment Variables.
3. Modify the Path variable to include the location of the ISM directory path,
as shown in the following sample:
C:\ism\ver#\bin
4. Click OK.
5. Click OK to close the Environment Variables dialog.
Note: The remaining steps are performed when you install the agent. If
this procedure is skipped, perform the following steps.
6. Locate the sm_versions.std file
Note: The sm_versions.std file is a template for setting up the
sm_versions file with information about the Storage Manager.
For more information about the sm_versions file, see the Informix user
documentation.
7. Rename the existing sm_versions file to exclude the extension .std, as
defined in your IDS release notes and as shown in the following example:
Informixdir\etc\sm_versions.std
to:
Informixdir\etc\sm_versions
8. Open the sm_versions file using Notepad to make sure it contains the
following string:
1|1.0.1|ism|1|
If the string is not present, add it at the end of the file and save the file.
9. Close the file.
14 Agent for IBM Informix Guide