Sheet4, Drawing view5, Drawing view6 – AVF T628T User Manual
Page 4: Drawing view7, Drawing view20, Drawing view21, Drawing view23, Drawing view24, Page 4
Advertising
4. Lay out the table tops and fasten the mending plates as indicated securing them
with the wood screws provided
5. Using a cordless drill and a phillips (+) bit secure the cam pins into the pre-drilled holes
6. Insert Dowels into pre-drilled holes and esure they are fully seated
36
10
32
11
7. Align both pre-assembled pods approx. 26" apart in the desired location
26" Spacing
Page 4
of 8
Advertising