Sheet2, Drawing view150, Drawing view163 – AVF MM1232 User Manual
Page 2: Drawing view165, Drawing view168, Drawing view169, Drawing view171, Drawing view179, Drawing view182, Drawing view188
(Camera and
TV hidden)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Feed cables for camera and TV through spine.
Use cable ties and cable tie mounts to restrain
loose cables.
Step 2
Page 2
of 2
Using the M6 Bolt
and Wing nut.
Tighten using 5mm
Hex Key.
Step 3
Attach camera to the camera neck using
M3 bolts or 1/4-20. (depending on camera model)
Step 4
If you have any problems,questions or suggestions, we value your feedback. Toll free 1-877-834-3876
You're Done!
Place the spine over the grommet hole.
Then feed the cables though before tightening.
Tighten the clamp against the cart surface
using a 5/16 nut and wrench.
Step 5
Alighn the TV and camera neck at the desired height.
Use 5/16 nuts and wrench to secure in place.