Hit Products RainPro Battery Operated Controller User Manual
Page 10
9
Watering Every Day at a Set Time (P1)
If you would like to irrigate every day at the same time use the
program P1:
Setting the Start Time
After setting the irrigation run time, the following screen appears:
On this screen, the clock numbers refer to the time you wish
irrigation to begin.
1. Use the
+
and the
-
buttons to adjust the minutes.
2. Press
SET to continue.
3. Use the
+
and the
-
buttons to adjust the hours.
4. Press
SET to return to operating mode (P1 programming
is now complete).
Example
If you wish to irrigate every day at 9:00 in the morning, for 20 minutes:
Make sure the clock is set, and you are in an operating mode. Press
MODE twice to get to the Duration Time (with the “tap” icon). Set the
Duration Time to 0:20. Then set the clock (on the following screen with
the “clock face” icon and “tap” icon) to 9:00.