Home Styles 5549-16 - Manual (Page 2)

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 2
Place Top Unit (A) upside down on a soft cloth.
Attach Legs (B), (C), (D) and (E) to
Top Unit (A) with Flat Washers, Spring Washers
and Head Cap Bolts.
Tighten Head Cap Bolts only half way.
(See Figure 2)
Attach Stretchers (F) and (G) to the unit
with Wood Screws (long).
Tighten Head Cap Bolts completely.
A
A
F
G
G
B
C
D
E
Figure 1
Figure 2
/3
STEP 1
Remove outside drawers from Top Unit (A).
Remove the keyboard from Top Unit (A) by pushing the plastic lever on its’ left side up, pushing
the plastic lever on its’ right side down and pulling the keyboard open slowly.
(See Figure 1)
Wood Screw (long)
Head Cap Bolt
Flat Washer
Spring Washer