Home Styles 9100-1011 - Manual (Page 2)

Assembly Instructions 2/3
STEP 1
STEP 2
STEP 3
G
D
G
H
H
H
K
K
K
C
D
A
C
Attach 4 Casters to the underside of the
Base (G), put the 2 Casters with
lock in front as you first need to lock the
cart from moving. (See sticker in the bottom indicating front side)
Put the Front Rail (K) in between the
Middle Frame (C) and (D).
Attach the Side Panel (A) to the
side of the unit with Head Cap Bolts.
Slide the Back Panels (H) into place.
Attach the Back Post (F) and
Front Post (E) to the Middle Panel
(C) and (D).
Attach the assembled Middle Panel
(C) and (D) to the Base (G).
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
F
C
E