Home Styles 5181-64 - Manual (Page 2)

Assembly Instructions 2/5
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
Figure 1
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of
Top (A), (N), Bottom (D) and Side Panel (E), (F), (P), (Q).
(see Figure 1)
A D
Q
N
F
P
Cam Lock Screw
E