Home Styles 5004-94 - Manual (Page 4)

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
Assembly Instructions 2/4
STEP 1
Put Cam Lock Screws into the pre-drilled holes of Leg (K),(L) and tighten.
Cam Lock Screw
K
L
Attach Back Stretcher (C) to Leg (K) using Cam Locks.
Attach Back Stretcher (D) to Back Stretcher (C).
Slide Back Panel (N) to unit, then attach Back Stretcher (C) to unit using Cam Locks.
Attach Leg (L) to the unit using Cam Locks.
STEP 2
K
L
N
N
C
D
C
Cam Lock