Home Styles 9100-1011 - Manual (Page 2)

STEP 3
STEP 1
STEP 2
S
T
U
U
U
V
A
B
Place Top (W1) onto the unit,
then tighten up all
Head Cap Bolts.
Attach Pull Handles to
Door (S) and (T), using Machine
Screws. (See figure 1)
Attach Door (S) and (T) to
Side Panel (A) and (B), slide the
door lift hinges into the side panel
lift hinges. (See figure 2)
Slide Drawers (U) and (V)
into place.
9100 Series Top Assembly Instructions
Figure 1 Figure 2
Put Top Support (X) into the
pre-drilled holes, using Head
Cap Bolts to attach it to the unit.
W1
X
X
Head Cap Bolt
Head Cap Bolt