Home Styles 5092-94 - Manual (Page 3)

Assembly Instructions 3/5
C
C
B
B
A
Figure 2
A
STEP 1
Cam Lock Screw
C
Figure 1
Remove the Drawer from Top (A).
STEP 2
Put Cam Lock Screws into
the pre-drilled holes of
Side Panels (C) and tighten.
(see Figure 1)
Assemble Side Panel (C) and
Rail (B) using Cam Lock.
(see Figure 2)
Place the unit onto Top (A).
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.